|
|
|
|
|
|
|
|
|
|
What are the reasons for the glue plugging of the automatic dispenser equipment?
|
|
In the process of dispensing the product with automatic dispensing equipment, there may be a blockage of the glue valve. What is the cause?Below, let YIERMAI technology to introduce for you. so you can better use glue machine.
1, The automatic dispenser gas source is unstable
The unstable gas source of the automatic dispensing machine is one of the causes of the rubber valve blocking. The unstable gas source of the dispensing equipment can also lead to production problems such as uneven dispensing and insufficient glue supply, and will affect the double acting plunger. The valve works normally. The method for solving the unstable gas source of the automatic dispenser is also very simple. During the use process, the operator checks that the gas source instability problem occurs in the automatic dispenser, and can choose to replace the delivery tube or re-adjust the air pressure.to solve the problem of blockage of the double acting plunger valve
2. There is impurity blocking in the double acting plunger valve.
The double-acting plunger valve is one of the indispensable dispensing parts when the dispensing equipment is working. If it is checked in the product dispensing section, it is easy to check if the impurity in the double-acting plunger valve blocks the glue outlet. This caused the rubber plugging problem to occur. If the rubber plugging problem occurs due to impurities in the double acting plunger valve, the impurities in the double acting plunger valve can be cleaned by high pressure gas blowing.
If it is not the glue plugging caused by the above reasons, you can check the production quality of the automatic dispensing machine and the double acting plunger valve. If the dispensing equipment has no problem in quality, you can try to put the double acting plunger valve, conveying pipe, etc. The cleaning and dispensing machine parts can be cleaned and maintained once, avoiding the problem of blockage of the valve and maintaining the production quality of the product.
|
|
|
|
|
|
|
|
|
|
|
